Essential rigging tools for securely lifting and moving large weights are round and webbing slings. They can safely limit loads and avert mishaps and harm when utilized appropriately. But it’s important to know how to choose and use slings properly. The following are some tips for using round and webbing slings made by reliable webbing sling manufacturers.
Flat woven polyester or nylon webbing with metal fittings fastened to both ends is used to make webbing slings. They are easy to check for wear and tear and appropriate for common lifting applications. Round slings have a circular webbed design and are handy when the load has sharp edges. Before lifting, always inspect slings for cuts, abrasions, melting, or discoloration which could compromise strength. Discard damaged or expired slings as per the manufacturer’s recommendations.
Determine the weight of the load and choose slings with the correct capacity. The manufacturer’s specification sheets list maximum load ratings for various sling types and configurations. Using slings below the lift capacity can risk failure. Similarly, greatly exceeding ratings will shorten the sling’s lifespan.
Attach the sling by passing one end through the other to form a closed loop. Never use knots as they reduce strength significantly. Ensure a minimum of five wraps of slack webbing remain in the attachment/choke point even under maximum load. Two or more legs of different slings can be connected using screw or shackle connectors as obtained from the top webbing sling manufacturers.
Attach slings carefully without twisting so the load is balanced, and the angle of all legs remains similar when lifted. Uneven forces put unwanted stress which deteriorates slings faster. Tag lines may be fastened for better control during lifting.
Lift the load slowly and check for any odd movements, noise, or felt vibrations which could indicate an unstable attachment or developing defect. Stop immediately if flaws are noticed and rectify before continuing.
Lower loads carefully by controlling lowering devices like hoists, winches, or come along. Do not abruptly release tension on slings as that subjects them to shock forces. Disconnect slings only after ensuring loads will not roll or fall. Store slings neatly on racks or shelving units after use to maintain organization and traceability as per the webbing sling manufacturer’s processes.
Proper sling maintenance and periodic inspection as per manufacturer recommendations also play a vital role in safety and extending product life. Even fully synthetic slings do corrode, crack, or break down over time with exposure to weather, chemicals, or continuous usage. Trust-certified rigging products sourced from reputable webbing sling manufacturers for critical lifting jobs. Following basic guidelines ensures webbing and round slings safely restrain loads as intended.
Tags: webbing sling manufacturersCategorised in: Webbing Slings
This post was written by Dutest
Comments are closed here.